Language

srb

eng

+381 (0)11 21 97 392

office@konvexgv.rs

The Elster Meter regulators of the medium pressure are available in a wide range of different nominal pressures, design features and connections. Beside the standard integrated safety shut-off valve (SSV) other safety devices can be chosen as an integrated limited capacity relief valve or a low pressure cut-off. The range of medium pressure regulators encloses balanced one stage inlet pressure regulators and two stage regulators with nominal pressures of PN 1, PN 5 and PN 6. The PN 1 and PN 5 units are fire safe according to the German standard DIN 33822. All units are approved by DVGW according to the pressure equipment directive (PED): PN 1/PN 5 bar in accordance with DIN 33822, PN 6 bar in accordance with EN 334 / EN 14382

 

J123

J123

The J123 is a spring loaded distribution and industrial regulator that can also be operated by auxiliary systems and is suitable for use as a monitor or active regulator. It is designed for use in installations complying with the requirements of BGC/PS/E26 (formerly DIR6) and IGE/TD/10. All units are suitable for operation on natural, liquefied petroleum and manufactured gases and can be ...

Medium pressure regulatorsElster GmbH
J123HP

J123HP

The J123HP is a spring loaded distribution and industrial regulator that can also be operated by auxiliary systems and is suitable for use as a monitor or active regulator. The unit has a higher outlet presure range than the standard regulator. It is designed for use in installations complying with the requirements of BGC/PS/E26 (formerly DIR6) and IGE/TD/10. All units are suitable for operation ...

Medium pressure regulatorsElster GmbH
J125

J125

The J125 range of regulators for service applications where accurate pressure control is required. Ideal for industrial pressure reducing, metering stations and for district distribution. Inlet pressure range of 70mb - 8.6 bar. The ¾”, 1" and 1½” sizes are available with screwed connections, the 2” size is available with screwed or flanged connections. The J125 ...

Medium pressure regulatorsElster GmbH
J125B

J125B

The J125B series of regulators for service applications where accurate pressure control and high flow rates are required. The units are ideal for industrial pressure reducing, metering stations and for district distribution. Available with screwed connections, sizes 1½” and 2”, and 50mm flanged connections. All units are connected with an external impulse connection. The ...

Medium pressure regulatorsElster GmbH
M2R

M2R

The M2R can be used for indoor and outdoor installations. The modular concept of the regulator makes a wide variety of connections possible, e. g. angled connection in accordance with European standards, flanged connection, threaded connection, flange inlet with threaded outlet connection, co-axial 25 mm in accordance with DIN 33822. Features include: safety diaphragm, built-in safety shut-off ...

Medium pressure regulatorsElster GmbH
MAF

MAF

MAF …E series of medium-pressure regulators for domestic, commercial and industrial use. Installation is via a special co-axial connection. The devices are fitted with a safety shut-off valve with either overpressure or over/underpressure cut off and safety diaphragm. Low-pressure cut off is optional. Diameters DN 25, 40 Inlet pressure range up to 1 bar, the devices operate starting ...

Medium pressure regulatorsElster GmbH
MR

MR

MR series of medium-pressure regulators available in flanged and threaded versions for domestic, commercial or industrial use. The devices are fitted with a safety shut-off valve with either overpressure or over/under pressure cut off and safety diaphragm (and a relief valve for the 5 and 6 bar devices). Low-pressure cut off is optional (1 bar version). Diameters DN 25, 50 Inlet ...

Medium pressure regulatorsElster GmbH
prikaži još