- Naziv proizvoda
- HON 240 Single Diaphragm Regulator
- Honeywell-RMG Kassel, Bryan Donkin, Gorter /Regulatori pritiska gasa do PN 16 (ANSI 150)
-Diaphragm casing can be rotated through 360° relative to regulator body (without vent limiting device)
-Rapid response to load changes
-Wide range of interchangeable orifices
-Regulator can be installed in any position
-Can be fitted with integral over-pressure (OPCO) or under-/over-pressure cut-off valve (UPCO/OPCO)
-May be optionally fitted with a safety diaphragm and vent limiting device (VLD) for applications requiring no vent piping per ANSI Z21.80/CSA 6.22.
-Cartridge-type diaphragm and valve assembly for ease of maintenance
-Suitable for natural, non-aggressive and manufactured gases; nitrogen, carbon dioxide and propane; and other gases upon enquiry
-Max. inlet pressure pu max: up to 10.3 bar
-Outlet pressure range Wd: 0.01 to 0.21 bar
-SSV setting range
-Wdo 0.035 to 0.26 bar
-Wdu 0.01 to 0.03 bar
-Temperature range: 40 to 60°C
Connection: Pipe screw connection R ¾", R 1"
-P – without internal Safety Relief Valve (SRV)
-R – with internal Safety Relief Valve (SRV)
-LR – internal SRV
-SD - safety diaphragm
All mechanical components of this device are without ignition sources. As such, they are not subject to ATEX 95 (94/9/EC). All electrical components used with this device fulfil the ATEX requirements.