- Naziv proizvoda
- HON 260 Regulator
- Honeywell-RMG Kassel, Bryan Donkin, Gorter /Regulatori pritiska gasa do PN 16 (ANSI 150)
-Diaphragm housing may be turned 180 degrees with respect to main valve body
-Installation of different valve seat diameters possible
-Regulator can be installed in any position (without vent limiting device)
-May be optionally fitted with a Safety Relief Valve for over-pressure (OPCO) or over-pressure/ under-pressure release (UPCO/OPCO)
-Suitable for natural, non-aggressive and manufactured gases; nitrogen, carbon dioxide and propane; and other gases upon enquiry
-Max. inlet pressure pu max: up to 10 bar
-Outlet pressure range Wd: 0.01 to 0.385 bar
-Angular type: Inlet: ½", ¾", 1"; Outlet: 1"
-Straight type: Inlet: ½", ¾", 1"; Outlet: ½", ¾", 1"
-Type: F with incorporated filter
-Temperature range: 40 to 60 °C
All mechanical components of this device are without potential ignition sources and/ or hot faces. They are not subject to ATEX 95 (94/9/EC). All electronic accessories, on the other hand, meet ATEX requirements.